Andersen, electric winch 52 FS E1 12V

Description

Andersen EL winch 52 FS E1 12V is an electric sheet winch designed to easily hoist and trim sails of any size. It only takes the press of a button to control lines and sails, making it accessible to all crew members.

• Brand: Andersen
• B: 200 mm
• D: 100 mm
• Gear: 21
• H: 238 mm
• J: 174 mm
• L: 116 mm
• Max deck: 43 mm
• Motor: 0 HP
• N: 350 mm
• S: 64 mm
• Rope Ø: 8-14 mm
• Type: Winch 52 ST
• Volt: 12 V
• Product weight: 28 kg
• Made in: Denmark
• Package dimensions: Size: 73 cm × 35 cm × 35 cm | Gross weight: 27.66 kg

Andersen offers several types of electric winches. The cheapest version is a 1-gear motor, available in sizes from 28 to 72. Here you get a powerful motor and, at the same time, the option of a 2-gear manual winch.

Andersen E1 electric winches let you hoist and trim sails of any size at the press of a button. They remove the need for physical strength, making it possible for all crew members to handle lines and sails easily and safely.

Easy installation The motor has 2 built-in relays, which means a more reliable, neater, and easier installation. Installation only requires connecting positive and negative power cables to the motor terminals and connecting the included control pushbutton using the output cable. A circuit breaker, which is not included, must be installed to protect the installation.

Efficient, high-quality motor At the heart of the E1 winch is a high-quality motor, developed and manufactured in Europe. Carefully matched with the optimal gearbox, it delivers high speed under low load and low speed under high load for safe fine trimming when sailing.

Illuminated “intelligent” push button The E1 winch comes with a push button with integrated LED that lights up when power to the winch is on. The push button has a protective cover to prevent accidental winch operation and is IP67 waterproof. The push button also functions as a control unit with flashing status codes that assist with troubleshooting in the event of overload or other faults. A cable for connecting the push button is included for easy installation.

Unmatched monitoring and protection:

• Integrated overload protection - The control is pre-set to stop the winch if Maximum Pull Load is exceeded. Operation can resume within a few seconds once the load returns below the limit.
• Thermal overload protection - The motor deactivates in case of overheating and automatically resets when the temperature returns to normal.
• Reverse polarity protection - An integrated 5 Amp fuse protects the motor against incorrect cable connection.
• Accidental start protection - The winch is disabled if the push button has already been accidentally activated.
• Low voltage detection - Operation is disabled if the battery level is low, preventing further battery drain and avoiding low-voltage resets of navigation instruments and other electronic equipment.
• Continuous run time - The winch stops if continuous operating time exceeds 10 minutes.
• Manual operation - The winch can still be used as a backup in manual mode.
• Incl. switch w/40 cm wire