1852, Automatic bilge pump 550 GPH 12V Ø19mm

Description

1852 Automatic Bilge Pump 550 is designed to keep your boat dry by automatically removing water. With a capacity of 550 GPH/2079L, it is ideal for boat owners looking for a hassle-free water removal solution.

• Brand: 1852
• Weight: 0.39 kg
• Amp: 2.5 A
• Approval: CE
• Capacity: 2079 l/hour
• Lift: 2 m
• Fuse size: 5 A
• Volt: 12 V
• Package dimensions: Dimensions: 21 cm × 16 cm × 8 cm | Gross weight: 0.39 kg

This bilge pump has no external or internal sensor. It detects water solely through the load on the impeller, completely without the use of additional sensor components.

Features:

• Automatic float switch: This feature allows the pump to turn on and off automatically as the water level changes. This means you do not need to monitor the pump constantly.
• Ignition-protected: The pump is designed to be safe against ignition sparks, reducing the risk of fire or explosion.
• High efficiency, low-amp motor: This motor is energy efficient and uses less power, which extends battery life.
• Stainless steel shaft: The stainless steel shaft ensures durability and resistance to corrosion, which is important in marine environments.
• Submersible: The pump can be fully submerged in water, making it ideal for use in the boat's bilge.
• Automatic inspection: The pump checks for water every 2.5 minutes and runs for 0.5 seconds per cycle to minimize power consumption.
• Load detection: It determines whether water is present by measuring resistance on the impeller. If there is water, the impeller meets high resistance, and the pump runs continuously to pump the water out.
• Automatic shut-off: Once the water has been pumped out, the impeller spins freely with low load (idle), after which the pump switches off automatically and returns to the 2.5-minute inspection cycle.

Hose size: Ø19mm