Andersen, electric winch 28 FS E1 24V

Description

Andersen E1 electric sheet winches are designed to hoist and trim sails of any size. With the push of a button, all crew members can control lines and sails easily and safely, removing the need for physical strength.

• Brand: Andersen
• B: 125 mm
• D: 70 mm
• Gear: 21
• H: 159 mm
• J: 180 mm
• L: 73 mm
• Max deck: 49 mm
• N: 304 mm
• S: 64 mm
• Rope Ø: 8-14 mm
• Type: Winch 28 ST
• Volt: 24 V
• Product weight: 18 kg
• Package dimensions: Size: 40 cm × 60 cm × 40 cm | Gross weight: 20.16 kg

Andersen offers several types of electric winches. The least expensive version is a 1-gear motor, available in sizes from 28 to 72. Here you get a powerful motor and, at the same time, the option of a 2-gear manual winch.

Andersen E1 electric winches give you the ability to hoist and trim sails of any size at the push of a button. They remove the need for physical strength, making it possible for all crew members to control lines and sails easily and safely.

Easy installation The motor has 2 built-in relays, which means a more reliable, neater and easier installation. Installation only requires connecting positive and negative power cables to the motor terminals and connecting the included control push button using the output cable. A circuit breaker, not included, must be installed to protect the installation.

Efficient, high-quality motor At the heart of the E1 winch is a high-quality, European-made and developed motor. Carefully matched with the optimal gearbox, it delivers high speed at low load and low speed at high load for safe fine adjustment when trimming.

Illuminated “intelligent” Push Button The E1 winch comes with a push button with integrated LED that lights up when power to the winch is on. The push button has a protective cover that prevents accidental winch operation and is IP67 waterproof. The push button also functions as a control unit with flashing status codes that assist with troubleshooting in the event of overload or other faults. A cable for connecting the push button is included for easy installation.

Unmatched monitoring and protection:

• Integrated overload protection - The control is preset to stop the winch if Maximum Pull Load is exceeded. Operation can resume within a few seconds when the load returns below the limit.
• Thermal overload protection - The motor deactivates in the event of overheating and automatically resets when the temperature returns to normal.
• Reverse polarity protection - An integrated 5 Amp fuse protects the motor against incorrect cable connection.
• Accidental Start Protection - The winch is deactivated if the push button is already activated by mistake.
• Low Voltage Detection - Operation is deactivated if the battery level is low, preventing further battery drain and avoiding low-voltage reset of navigation instruments and other electronic equipment.
• Continuous Run Time - The winch is interrupted if continuous operating time exceeds 10 minutes.
• Manual operation - The winch can still be used as a backup in manual mode.
• Incl. switch w/40 cm cable