Engine mount Shore 55, 60 kg

Description

Phoenix engine mounts are designed for marine use and are made from materials that can withstand the loads in the engine room. This ensures efficient transfer of the engine’s power to the vessel with minimal vibration and noise.

• A: 120 mm
• Weight: 0.6 kg
• B: 100 mm
• C: 60 mm
• D: 38 mm
• E: M12 mm
• Shore: 55
• Size: Engine 10<85 Hp
• Made in: Holland
• Package dimensions: Dimensions: 10 cm × 6.5 cm × 12 cm | Gross weight: 0.6 kg

To transfer the engine’s power to the vessel’s propulsion with as little vibration and noise as possible, you need the correct size engine mount. Shore indicates the hardness of the damper. 55 is normally suitable for most engine installations, but there may be situations where you want a softer or harder mount. Talk to your engine mechanic about which hardness will suit your boat.

Calculate which mount you need: When you need to calculate which mount to use, you need to think about where the center point is in the engine installation. So it is often the case that you need to use 2 sets with different hardness. It is the total weight of the installation including oil and water, and it is better to choose a mount that is slightly too soft than one that is too hard.

Which mount size should be chosen: Engine 125 kg, 4 legs (125x2): 4 = 62,5 kg So 1510030 should be used

Engine: 10<85 Hp. Weight: 60 kg/piece