SeaTec, Engine mount 300kg shore65 70<250 hp

Description

Phoenix engine mounts are designed for marine use and made from materials that can withstand all the demands of an engine room. This ensures that the engine's power is transferred to the vessel with minimal vibration and noise.

• A: 230 mm
• Vægt: 2.9 kg
• B: 182 mm
• C: 112 mm
• D: 70 mm
• E: M20 mm
• Shore: 65
• Størrelse: 70250 HP.
• Emballagemål: Mål: 25 cm × 8 cm × 11 cm | Bruttovægt: 2.9 kg

To transfer the engine's power to the vessel's propulsion with as little vibration and noise as possible, you need the correct size engine mount. Shore indicates the hardness of the damper. 55 is normally suitable for most engine installations, but there may be situations where you want a softer or harder mount. Talk to your engine mechanic about which hardness will suit your boat.

Calculate which mount you need: When you need to calculate which mount you need, you should think about where the center point is in the engine installation. So it is often the case that you need 2 sets with different hardness. It is the total weight of the entire installation including oil and water, and it is better to choose one that is a little too soft than one that is too hard.

Which size mount should be chosen: Engine 125 kg, 4 legs (125x2): 4 = 62,5 kg So 1510030 should be used

Engine: 70<250 HP. Weight: 300 kg/pc