Rutgerson, Master Flush Luge 60 577x577x10 mm

Description

Master Flush Hatch 60 is a flush-mounted deck hatch that gives the boat a modern look. The hatch is designed for access and ventilation, and is built with tinted acrylic glass and stainless steel to ensure a strong, lightweight construction.

• Brand: Rutgerson
• Dimensions: 577 x 577 x 10 mm
• Material: Tinted glass and stainless steel
• Product weight: 7500 g
• Product dimensions: 31 mm
• Made in: Sweden
• Package dimensions: Gross weight: 0.02 kg

Master Flush Hatch 60 is a flush-mounted deck hatch for boats where you want a smooth, even surface without external fittings. The hatch gives a modern look and makes it easier to move safely on deck. It is relevant for boat owners who want a lightweight, strong and fully integrated solution for access and ventilation. The hatch is built from a high-tech composite material combined with 12 mm tinted acrylic glass. This construction provides low weight and high strength and resists load, weather exposure and impact. The flush-built frame hides hinges, handles and vent, so the entire surface sits level and reduces wind resistance. The hatch operates securely and tightly, even in rough weather. The hatch is installed in a recessed recess in the deck. It can be used as an access or ventilation hatch and fits easily into both new installations and renovation projects. It works in composite and fiberglass constructions where a flush design is desired. The tinted acrylic provides both light transmission and screening. The smooth top reduces the risk of snagging on equipment and provides better safety when you walk on deck. The low weight contributes to better balance in the boat, and cleaning is easy since no fittings protrude. The hatch is a good fit for boats with a focus on modern lines and functional use of deck space.

INSTRUCTIONS FOR USE 1 Prepare the installation by cutting out a hole of 506 x 506 x 40. 2 Clean all contact surfaces. 3 Apply sealant along the cutout and lower the hatch into position. 4 Tighten the screws gradually and check that the lid opens and closes freely. 5 Finish by checking the seal and rinsing the area after first use.