Rutgerson, SeaTec, Rutgerson wire block 100 mm 150 mm

Description

Rutgerson wire block in stainless steel designed to guide and adjust wire under high load. It is ideal for sailors working with backstays or rig trimming, and ensures reliable line handling.

• Working load: 4000 kg
• Breaking strength: 8000 kg
• Sheave diameter: 100 mm
• Rope Ø: mm
• Product weight: 685 g
• Wire: Ø 10 mm
• Wire Ø: 0 mm
• Product dimensions: 150 mm
• Package dimensions: Gross weight: 0.02 kg

These wire blocks are used in systems where you need to guide or adjust wire safely under high load. They are relevant for sailors working with backstays, heavy rig trimming, or other functions where wire requires a strong and stable turning point. The block provides reliable line handling and long-term operational reliability. The wire block is made from high-quality stainless steel, making it corrosion-resistant and virtually maintenance-free. It is designed to withstand heavy loads and maintain smooth rotation even when the wire is tensioned hard. The robust construction is suitable for continuous use in harsh marine environments and ensures long service life. The block is used in wire-related systems such as backstay adjustment, support wires, rig tensioning, or other installations where a wire must change direction or be held under tension. It can easily be integrated into existing rigging setups and is suitable for cruising, long-distance, and racing boats alike. The wire block is ideal for installations where you want a strong, reliable, and maintenance-free block system. It handles high loads without deforming and can be used in setups where both vibration and saltwater are constant factors. It requires minimal servicing and is a good choice for both larger and smaller boats.

Shackle pin Ø for 1310361: 6 mm Shackle pin Ø for 1310362: 8 mm Shackle pin Ø for 1310363: 8 mm Shackle pin Ø for 1310295: 10 mm Shackle pin Ø for 1310364: 14 mm

INSTRUCTIONS FOR USE Preparation: Check the wire diameter and select the correct mounting point.

Installation: 1 Secure the wire block with a suitable fitting or shackle. 2 Lead the wire through the sheave and check that it runs freely. 3 Tension gradually and check that the sheave rotates without resistance.

After use: Rinse the block in fresh water if needed. It requires no further maintenance.